PUBLICATIONS (all refereed)


1.      "Hydrogen Induced Disorder-Order Transition in Pd3Mn" with T.B.Flanagan, T.Kuji, K.Baba,  and Y.Sakamoto, Scripta Met. 20, 1745 (1986).


2.      "Electrical Resistance Anomalies and Hydrogen Solubilities in the Disorder-Order System Pd3Mn", with K.Baba, Y.Sakamoto, T.B.Flanagan, and T.Kuji, Scripta Met. 21, 299 (1987).


3.      "Reversible Transitions Between Ordered Structures in the Pd3Mn-Hydrogen System", with K.Baba, Y.Niki, Y.Sakamoto, and T.B.Flanagan, Scripta Met. 21, 1147 (1987).


4.      "Synthesis and Characterization of Picryl Cellulose", with M.Strauss, R.Torres, J.Phelan, B.Pitner, D.Nason, Y.Carignan, J.Dust, and E.Buncel, Can. J. Chem. 65, 1891 (1987).


5.     "Evidence for Ordering in Hypostoichiometric Alloys of Pd3Mn", with R.Foley, T.B.Flanagan, K.Baba, Y.Niki, and Y.Sakamoto, Scripta Met. 22, 511 (1988).


6.     "Thermodynamics, Isotope Effects, and Hysteresis for the Triple Point Transition in the Niobium-Hydrogen System", with T.Kuji and T.B.Flanagan, J. Physics F:Metal Physics, 18, 1149 (1988).


7.     "Blocking of Hydrogen-Dislocation Interactions in Palladium by Interstitial Carbon (Boron) Solutes", with T.B.Flanagan, R.Foley, Y.Sakamoto, and S.Kishimoto, Acta Metall. 7, 1791 (1988).


8.      "The Transition of the Hydrogen-Induced L12 Ordered Structure of Pd3Mn to the Ag3Mg Structure", with K.Baba, Y.Niki, Y.Sakamoto, and T.B.Flanagan, J. Mater. Sci. Letters, 7, 1160 (1988).


9.      "Optic Mode Frequencies of Hydrogen in Ordered and Disordered Pd3Mn", with J.J.Rush, J.D.Clewley, and T.B.Flanagan, J.Phys.:Condens. Matter, 1, 5059 (1989).


10.   "Thermodynamic Characterization of the ZrNi-H System by Reaction Calorimetry and p-c-T Measurements", with W.Luo, T.Kuji, H.S.Chung, and T.B.Flanagan, J. Less-Common Met. 162, 251 (1990).


11.   "Hydrogen Induced Metal Atom Mobility in Palladium-Rhodium Alloys", with H.Noh, T.B.Flanagan, and B.Cerrundolo#, Scripta Met. et Mater. 25, 225 (1991).


12.   "Comparison of Some Mechanical Properties of the Three Structural Forms of Pd3Mn", with S. Nesbit and R. Foley, Scripta Met. et Mater. 25, 1183 (1991).


13.   "Hydrogen Interactions as Studied by Internal Friction in Pd3Mn", with T.B.Flanagan, B.Sobha, B.Coluzzi and F. Mazzolai, J. Phys.:Condens. Matter, 4, 3377 (1992).


14.   "Influence of Hydrogen Exposure Conditions on the Mechanical Properties of the Hydrogen-Induced L12 Ordered Form of Pd3Mn", with S.Sowers#, A.Banko#, D.Bennett# and S.Nesbit, Scripta Met. et Mater. 26, 273 (1992).


15.   "Hydrogen-Induced Metal Atom Rearrangements in Pd3+xMn1-x Alloys using TEM, Electrical Resistivities and H2 Solubilities", with T.B.Flanagan, Y.Niki, K.Baba and Y.Sakamoto, J. Alloys and Compounds, 184, 69 (1992).


16.   "Mechanical Properties of the Order-Disorder System Pd3+xMn1-x", with A.Banko#, S.Sowers#, D.Bennett# and S.Nesbit, Mat. Sci. Eng., A159, L9 (1992).


17.   "Effect of Fillers on the Temperature Relaxation Behavior of Unsaturated Polyester Based on Recycled PET", with A.Banko# and K.Rebeiz, J. Mater. Sci. Letters, 13, 934 (1994).


18.    "Influence of Hydrogen and Long-Range Order on the Tensile and Fatigue Characteristics of  Pd3Mn", with  J.Shenk#, A.Moss#, D.Jonsen#, S.Nesbit and K.Rebeiz, J. Mater. Sci. Letters, 13,    496 (1994).


19.    "Thermal Properties of Polymer Mortar Using Recycled PET and Fly Ash", with K.Rebeiz and A.Banko#, ASCE J. Mater. Civ. Eng., 7, 129 (1995).


20.    "Tensile and Fatigue Properties of the Order-Disorder System Pd3+xMn1-x" with A.Moss#, J.Shenk#, D.Jonsen#, K.Rebeiz and S.Nesbit, Mat. Sci. Eng., A199, 131 (1995).


21.   "Thermomechanical Properties of Unsaturated Polyester Resin Based on Recycled Poly(Ethylene Terephthalate)", with A. Banko#, S.Nesbit and K.Rebeiz, J. App. Poly. Sci., 56, 757 (1995).


22.    "Plastic Waste Management in Construction: Technological and Institutional Issues", with K.Rebeiz, Resources, Conservation, and Recycling, 15, 245 (1995).


23.    "The Solubility of Hydrogen and Deuterium in Crystalline Pd9Si2", with T.Flanagan, H.Noh and  Y.Andersson, J. Solid State Chem., 120, 90 (1995).


24.    "Strength Properties of Polyester Mortar Using PET and Fly Ash Wastes", with K.Rebeiz and J. Rosett#, J. Energy Eng., 122, 10 (1996).


25.    "Tensile Properties of Polyester Mortar using PET and Fly Ash Wastes", with K.Rebeiz, J. Rossett# and S. Nesbit, J. Mater. Sci. Letters, 15, 1273 (1996).


26.    "Hydrogen-Induced Phase Separation in Pd-Rh Alloys", with H. Noh, J.D. Clewley and T.B. Flanagan, J. Alloys and Compounds, 240, 235 (1996).


27.    "Influence of Partial Hydride Formation on the Mechanical Properties of Palladium", with C.Anderton#, N.Strother#, J. Pote#, K.Rebeiz, S.Nesbit and R.Foley, Scripta Materialia, 35, 1013 (1996).


28.    “Thermomechanical Properties of Polyester Mortar Using Recycled PET”, with K. Rebeiz, ASME Proceedings of Energy Week ’97, 3, 139 (1997).


29.    “Properties of Plain and Reinforced Polyester Concrete Made with Recycled PET” with K. Rebeiz, Ecomaterials, 1, 447 (1997).


30.    “Effects of Hydrogen Absorption/Desorption on the Tensile Properties of Several Palladium-based Alloys” with K. Rebeiz, 1998 Energy-Sources Technology Proceedings, 1, 371 (1998).


31.    “Temperature Properties of Polyester Mortar Using Fly Ash Waste” with K. Rebeiz and A. Banko, ASCE Practice Periodical of Hazardous, Toxic, and Radioactive Waste Management, 3, 107 (1999).


32.    “Tensile Characteristics of Palladium Exposed to Hydrogen (Deuterium)”, with K. Rebeiz, American Society of Civil Engineers Journal of Energy Engineering, 126, 95 (2000).


33.    “Polymer Concrete Using Coal Fly Ash” with K. Rebeiz, American Society of Civil Engineers Journal of  Energy Engineering,  128, 62 (2002).


34. “Properties of Polymer Concrete” with K. Rebeiz and S. Serhal, American Society of Civil Engineers Journal of Materials in Civil Engineering, 16, 15, (2004).


35. “Thermodynamics of Hydrogen Solution and Hydride Formation in Pd – Mn Alloys (Ordered  Alloys)” with S. Luo and T. Flanagan, Journal of Physical Chemistry B, 110, 8087 (2006).


36. "Stress-Induced Changes to the Triple-Point Phase Boundary of the Niobium-Deuterium System", with J. Bulak, G. Jimenez, N. Millette, and K. Rebeiz, Journal of Phase Equilibria and Diffusion, 28, 422 (2007).


37.  "The Role of Hydrogen-Exposure Temperature on the Mechanical Properties of Hydrogen-Cycled Palladium", with G. Jimenez, E. Dillon, R. Miller, F. Massicotte, and S. Nesbit, Scripta Materialia, 59, 870 (2008).


38.  "Factors Influencing the Tensile Strength, Hardness, and Ductility of Hydrogen-Cycled Palladium", with E. Dillon, G. Jimenez, A. Davie, J. Bulak, and S. Nesbit, Materials Science and Engineering A, 524, 89 (2009).


39.  "Effects of Hydrogen Exposure Temperature on the Tensile Strength, Microhardness and Ductility of Pd/Ag (25 Weight %) Alloy" with J. Dahlmeyer, Tr. Garrison, Ty. Garrison, S. Darkey, F. Massicotte, K. Rebeiz and S. Nesbit, Scripta Materialia, 64, 789 (2011).